|
Ambient Conditions
Operation: -20 to 55°C (-4 to 131°F);
0 to 95% relative humidity, non-condensing
Storage: -20 to 70°C (-4 to 158°F);
0 to 95% relative humidity, non-condensing
Power Requirements
100 to 230 Vac, 50/60 Hz
Power: 75 W
Optional: 24 Vdc
Display
1/4 VGA graphical backlit TFT color touch screen
Resolution: 320 x 240 pixels
Relays
Up to four SPDT, user-configurable contacts rated 100 to 230 Vac, 5 Amp resistive maximum, per probe module. Additional relays are available via digital network connection.
Outputs
Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analog outputs are available via digital network connection.
Optional digital communications via MODBUS® (RS-485) or PROFIBUS DP.
Inputs
Up to 12 analog 0-20 mA, maximum impedance 500 Ohms per probe module.
Additional inputs are available via digital network connection.
Control
PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, and on delay
Alarms
Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Communication (Optional)
MODBUS® (RS-485): Advanced communications/networking with PLC or SCADA system directly from analyzer.
PROFIBUS DP
GSM cellular module (FCC approved)
Ethernet service port (standard)
Multimedia memory card slot (standard)
Memory Backup
All user settings are retained indefinitely in memory (non-volatile) (EEPROM)
Mounting Configurations
Surface, panel, and pipe (horizontal and vertical)
Enclosure
IP65; ABS (display module) and metal (probe module) enclosure with corrosion-resistant finish
Dimensions
Probe module with attached display module: 315 x 250 x 142 mm (12.4 x 9.8 x 5.6 in.)
Weight
Approximately 6.5 kg (14.3 lbs.) depending on configuration
Certifications
cTUVus to UL 61010A-1 and CSA C22.2 No. 1010.1
TUV-GS to EN 61010-1
CE per 73/23/EEC and 89/336/EEC
*Specifications subject to change without notice.
|
