Equipos unicos de bolsillo a bajo costo, de altra precisión y calidad, ofrecen mediciones confiables al igual que un equipo portátil o de mesa. Son equipos de fácil transportación y fácil mantenimiento y calibración mismas que pueden realizarse por el mismo usuario.
MEDIDOR DE OXÍGENO DISUELTO TRACER. WE HAVE TWO MODELS
The Tracer PockeTester offers direct reading of Conductivity, Total Dissolved Solids, Salinity, and Temperature with one electrode.
Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
Adjustable Salinity Compensation from 0 to 50 ppt
Memory stores up to 25 data sets with DO and Temperature reading
Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
Optional 3 ft (1m) or 16 ft (5m) extension cable
Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48” (1.2m) neckstrap
|
Range
|
Resolution
|
Accuracy
|
|
DO (sat. mode):
|
0 to 200.0% |
0.1%
|
±2% FS |
| DO (conc. mode): |
0 to 20.00 ppm (mg/L) |
0.01 ppm (mg/L) |
0.4 ppm (mg/L) |
| Temperature: |
32 to 122°F
(0 to 50°C) |
0.1°F/°C |
±1.8°F (1°C) |
| Dimensions: |
1.4 x 6.9 x 1.6” (36 x 176 x 41mm) |
| Weight: |
3.8 oz (110g) |
|
Item Description
|
Code
|
|
Dissolved Oxygen Tracer
|
1761
|
| DO Sensor Module |
1762 |
| DO Membrane Kit (6 screw-on membranes and solution) |
1761M |
| Weighted Stand w/Sample Cups (5) |
1746 |
| Sample Cups w/caps (24) |
1745 |
| DO Extension Cable (1 meter) |
1763 |
| DO Extension Cable (5 meters) |
1764 |
MEDIDOR DE OXÍGENO DE BOLSILLO DO-600 a prueba de agua. IP57
 
Waterproof ExStik® II Dissolved Oxygen Meter
MEDIDOR DE CLORO TOTAL.
Total Chlorine TRACER
-
Use it to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester ever!
-
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
-
Readings are not affected by sample color or turbidity
-
Automatic self calibration
-
Extra bold display includes an analog bar graph feature
-
Memory can store up to 15 readings
-
Chlorine and pH modes also display sample temperature
-
Unit identifies which probe is in use and retains calibrations
-
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
-
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
-
Follows EPA protocol for ISE methods
  
CL200: ExStik® Chlorine Meter
Direct reading of Total Chlorine down to 0.01ppm
Features:
-
Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
-
Low detection limit down to 0.01ppm
-
Unaffected by sample color or turbidity
-
Memory stores, tags and recalls up to 15 readings
-
US EPA approved as an acceptable method for wastewater compliance monitoring of Total Chlorine.
Fluoride TRACER
 Features:
The Fluoride Tracer PockeTester offers direct reading of Fluoride down to 0.1 ppm with Automatic Temperature Compensation (ATC).
-
First Fluoride meter with built-in Automatic
-
Temperature Compensation Fastest response Fluoride meter (<1 min.)
-
Easy use for Field or Laboratory fluoride testing
-
Small sample/TISAB volume required for testing
-
In compliance with EPA Method 340.2 (Potentiometric Ion Selective Electrode)
-
Automatic electronic 1 or 2 point calibration with offset adjustment
-
Memory stores 25 labeled readings
-
Water-resistant to IP54
-
Large LCD simultaneously displays ppm of Fluoride, Temperature, and analog bargraph indicator
-
Complete with electrode, 20 TISAB reagent tablets, sensor cap, four 3V button batteries, and 48" (1.2m) neckstrap
Application:
Public Water Fluoridation Control - Fluoride is added to water to prevent tooth decay. However,
too much fluoride can harm teeth.
The concentration recommended by the American Dental Association is 0.7-1.2ppm.
Fluoride concentrations in some natural waters can exceed 4 ppm.
| |
Range
|
Max Resolution
|
Basic Accuracy |
|
ppm:
|
0.1 to 10 ppm |
0.1 ppm
|
±3% rdg |
| Temperature: |
32 to 140°F
(0 to 60°C) |
0.1°F |
±1.8°F (1°C) |
| Dimensions: |
1.4 x 6.9 x 1.6” (36 x 176 x 41mm) |
| Weight: |
7.4 oz (210g) |
|
Item Description
|
Code
|
|
Fluoride Tracer
|
1756
|
| TISAB Reagent, 100 Tablets |
1757 |
| Replacement Electrode |
1761M |
| Fluoride Standard, 1 ppm, 1000 mL |
2798-M |
| Fluoride Standard, 1,000 ppm, 60 mL |
4154-H |
| Fluoride Standard, 1,000 ppm, 500 mL |
4154-L |
FL700: Waterproof ExStik® Fluoride Meter
Direct reading of Total Fluoride down from 0.1 to 9.99ppm or mg/L
Features:
-
In compliance with EPA Method 340.2.( Potentiometric Ion Selective Electrode)
-
Large dual LCD displays ppm and Temperature with bargraph simultaneously
-
Range of Detection: 0.1 - 9.99 ppm or mg/L
-
Two point calibration
-
Memory stores 25 labeled readings
-
First Fluoride meter with built-in Automatic Temperature Compensation
-
Fastest response Fluoride meter (<1min)
-
Easy use for Field or Laboratory fluoride testing
-
Small sample/TISAB volume required for testing (10mL)
SURTIMOS PEDIDOS A TODO EL PAÍS
Ventas Centro y resto del país:
T/F: +52(55)24536614; MAIL: chemicalinst@axtel.net
Ventas Occidente, bajio, noroeste, Pacífico:
T/F: +52(33)13801272-GUADALAJARA
T: +52(33)36201659-Zapopan,Jalisco; Mail: ventas-chemicalinst@axtel.net
Ventas Golfo:
Móvil: (045/044)-33-14943562
DO sensor with easy to replace screw-on membrane cap with optional extension cables
Features:
- Oxygen level displayed as % Saturation or Concentration (mg/L [ppm])
- Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments)
- Adjustable Salinity Compensation from 0 to 50ppt
- Analog bargraph indicates trrends
- Memory stores up to 25 data sets with DO and Temperature reading
- Self calibration on power up
- Data Hold, Auto power off, Low battery indicator
| 
